Creative Modular Playground Structures

Mounds are joined together securely with rubber connectors that are bolted through the corners of each mound part. Bungs hide these bolt heads from view.

The mound is made up of mound ramps and mound quadrants. These dramatically alter the playground landscape, and can be arranged to form small humps to large hills, extended ridges and valleys, allowing children to experience different levels and slopes.

Clean with soap and water when necessary.

If you have bought a full Snug kit (SGU900), our delivery drivers will set up the mound for you in a starter configuration. If you want to set it up yourselves or reconfigure you will need a minimum of two adults. Start off by deciding exactly where you want the Mound to be placed, including its direction and configuration as it is hard to move once assembled. Try to place the Mound on as flat an area as possible.

There are two types of Mound pieces (Ramp and Quadrant) in Mound Pack One, these are fitted together. We suggest you start with a simple Mound set-up (Hill) or a larger Mound if you have the extension pieces. Put the whole Mound in position, then using the connectors, washers and fixing bolts, loosely bolt them in place. Adjust the position of the pieces as required, tighten all bolts, then finish off by putting in the connector bungs. Ensure Mounds are securely fixed together before use.

The mound can be slippery when wet.
Weights: Ramp 13.5kg, Quad 20kg, Slab 8kg, Platform 24kg. Size 2m x 3m x 0.6m ht (Hill).

Mounds are made from low density polyethylene (PET 4) filled with rigid polyurethane foam. Connection parts are made from low fade natural rubber with metal inserts. All mound elements are manufactured from low toxic and lead free materials.